Protege LX L4-1489cc 1.5L DOHC MFI (1998)
5. Stack 3 tires on top of the tire with the attached air bag module. Stack a tire that has a wheel on top of the 4 tires.
6. Tie all tires together with wire.
7. Connect the SST (Deployment Tool) to the SST (Harness Adapter).
8. Connect the red clip of the SST (Deployment Tool) to the positive battery terminal and the black clip to the negative battery terminal.
9. Verify that the red light on the SST (Deployment Tool) is illuminated.
STEP 3
10. Make sure all persons are standing at least 6 m (20 ft) away from the tire.
11. Press the activation switch on the SST (Deployment Tool) to deploy the air bag module.
Passenger-side air bag module
1. Remove the passenger-side air bag module. (Refer to PASSENGER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.) See: Removal
and Installation/Passenger Side - Air Bag Module
2. Install the bolts or nuts to the passenger-side air bag module.
WARNING:
