Protege LX L4-1489cc 1.5L DOHC MFI (1998)
3.
Remove the LOWER adjusting bolt and replace it with the modified adjusting bolt and adjusting washer as shown.
-
If adjusting to NEGATIVE camber, install the adjusting washer with the claw facing TOWARD the shock absorber.
-
If adjusting to POSITIVE camber, install the adjusting washer with the claw facing AWAY from the shock absorber.
Note
^
Be sure the adjusting washer claw is installed inside the bolt hole.
^
The camber adjusting range is 23 minutes.
4.
Tighten both the adjusting bolt and pivot bolt.
Tightening torque
103-126 N.m (10.5-12.9 kgf.m)
2000-2001 MPV
1.
Place the vehicle on a lift and remove wheel.
2.
Loosen LOWER pivot bolt.
3.
Remove the UPPER bolt as shown and replace it with an adjusting bolt and adjusting washer.
-
If adjusting to NEGATIVE camber, install the adjusting washer with the claw facing AWAY from the shock absorber.
-
If adjusting to POSITIVE camber, install the adjusting washer with the claw facing TOWARD the shock absorber.
Note
^
Be sure the adjusting washer claw is installed inside the bolt hole.
^
The camber adjusting range is 30 minutes.
