Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Seals and Gaskets: Service and Repair
OIL SEAL (TRANSAXLE) ON-VEHICLE REPLACEMENT
1. Remove the drive shaft and joint shaft.
2. Remove the oil seal.
3. Using the SST and a hammer, tap a new oil seal in evenly until the SST contacts the transaxle case.
4. Coat the lip of the oil seal with ATF.
5. Install the drive shaft and joint shaft.
6. Carry out the line pressure test.
7. Carry out the road test.