Protege LX Automatic Transmission Shifter A/T Information
Shifter A/T: Testing and Inspection
SELECTOR LEVER INSPECTION
1. Turn the ignition switch to ON (engine OFF).
2. With the brake pedal depressed, verify that there is a "click" at each range when shifted in the pattern shown.
3. Verify that the selector lever can only be shifted as shown.
4. Verify that there is a "click" at each position when shifted from P position to 1 range.
5. Verify that the position of the selector lever and the indicator are aligned.
6. If not as specified, adjust the indicator panel as follows.
7. Verify that the position of the selector lever and the selector illumination light in the instrument cluster are aligned.
8. If not as specified, adjust the transaxle range switch.
9. Verify that the vehicle operates in each selected range.
