Protege LX L4-1489cc 1.5L DOHC MFI (1998)
3. Push the drive shaft into the transaxle (left side) or joint shaft (right side).
4. After installation, pull the front hub outward to confirm that the drive shaft is securely held by the clip.
Drive Shaft Disassembly and Assembly
DRIVE SHAFT DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Boot Band Disassembly Note
NOTE: The boot band does not need to be removed unless replacing it.