Protege LX L4-1489cc 1.5L DOHC MFI (1998)
2. Set the drive shaft to the standard length.
3. Release any trapped air from inside the boot by using a rag-covered screwdriver.
4. Verify that the drive shaft length is within the standard.
5. If the drive shaft length is not within the standard, return to step 1.
6. Fold the new bands back by pulling on the ends with pliers, so that the ends of the bands are pointing opposite to the forward revolving direction
of the shaft.
7. Lock the ends of the bands by bending the locking clips.