Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Axle Shaft: Testing and Inspection
On-Vehicle Inspection
Preinspection
JOINT SHAFT PREINSPECTION
1. Verify that the joint shaft is not twisted or cracked. Replace it as necessary.
2. Turn the joint shaft by hand and verify that the bearing rotates smoothly and freely. Replace it as necessary.
Component
DRIVE SHAFT INSPECTION
1. Inspect the drive shaft dust boot for crack, damage, leaking grease, and loose boot bands.
2. Inspect the drive shaft for bending, crack, and wear of joints or splines.
3. Repair or replace the drive shaft as necessary.