Protege LX L4-1489cc 1.5L DOHC MFI (1998)
4. Working with another person, saw through the sealant around the edge of the glass. Use a long sawing action to spread the work over the
whole length of wire to prevent it from breaking. Make sure the SST (piano wire) does not rub on the body or the dashboard.
5. Remove the glass.
6. Remove the dam.
7. Remove the spacers A and spacer B.
INSTALLATION
1. Cut away the old sealant by using a razor knife so that 1-2 mm {0.04-0.08 in} thickness of sealant remains around the circumference of the frame.
If all the sealant has come off in any one place, apply some primer after degreasing, and allow it 30 minutes to dry. Then apply new sealant to
create a 2 mm {0.08 in} layer.
2. Carefully clean an area 50 mm (2.0 in} wide around the circumference of the glass and clean the bonding area on the body.
3. Securely bond a new dam onto the glass 8 mm (0.31 in} from the edge of the upper and the side portions as shown. Allow it to dry completely.
