Protege LX L4-20L DOHC: Water Pump Component Specifications
Water Pump: Service and Repair
WATER PUMP REMOVAL/INSTALLATION
1. Drain the engine coolant.
2. Remove the fresh air duct and air cleaner. (ZM model)
3. Remove the exhaust manifold insulator. (ZM model)
4. Remove the timing belt.
5. Remove the P/S oil pump with the oil hose still connected. Position the P/S oil pump so that it is out of the way (ZM model)
6. Remove the A/C compressor and A/C compressor bracket with the pipe still connected. Position the A/C compressor so that it is out of the way.
(ZM model)
ZM
FS
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.
Water Pump Installation Note ZM