Protege LX L4-2.0L DOHC (2001)
Headlamp Bulb: Service and Repair
REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove in the order indicated below.
1. Connector
2. Cover
3. Headlight bulb
CAUTION: A halogen bulb generates extremely high heat when it is used. If the surface of the bulb is dirty, excessive heat will build up and the
light's life will be shortened. When replacing the bulb, hold the metal flange, not the glass.
3. Install in the reverse order of removal.
Headlight Bulb Removal Note
1. Release the bulb seating wire to remove the headlight bulb.
Cover Installation Note
1. Make sure the cover is seated properly to prevent the moisture from getting into the headlight housing.
