RX7 2RTR-1146cc 70 (1982)
Idle Speed: Adjustments
Idle Speed
1.
Cool the engine compartment with an additional cooling fan, if available.
2.
Set the parking brake and block the wheels.
3.
Switch off all accessaries.
4.
Remove the fuel filler cap.
5.
Disconnect the tube at the idle compensator in the air cleaner and plug the end of the tube.
6.
Check that the dash pot rod and throttle opener (for air conditioner) does not keep the throttle lever from returning to the idle stop.
7.
Connect an accurate reading tachometer to the engine.
8.
Warm up the engine until it reaches normal operating temperature.
9.
On vehicles equipped with automatic transmission, shift the selector lever to "D" position.
10.
Check the idle speed. If the idle speed is not specified, adjust the idle speed to 750 rpm by turning the throttle adjusting screw .
Idle Speed: M/trans. 750 rpm in neutral, A/trans. 750 rpm in "D" position