RX7 2RTR-1308cc 1.3L MFI (1991)
Oil Pump: Service and Repair
Disassembly/Assembly
Legend
1. Snap ring
2. Rear outer rotor
3. Rear inner rotor
4. Key
5. Screw
6. Body
7. Center plate
8. Front outer rotor
9. Front inner rotor
10. Key
11. Shaft
DISASSEMBLY
Disassemble in the order shown in the image.
Caution
Do not interchange front and rear rotors when assembling.
Inspection
1. Inspect the oil pump pans for wear or damage, and replace if necessary.
2. Measure the clearance between the lobes of rotors with a feeler gauge.
Standard clearance:
0.03-0.12mm (0.0012-0.0047 in)
Limit: 0.15mm (0.0059 in)