RX7 2RTR-1308cc 1.3L MFI (1991)
1. Check the circuit breaker.
2. If the red button is not out, go to Step 2.
3. If the red button is out, check for a short circuit in the harness.
Repair as necessary; then depress the red button to reset the circuit breaker.
Step 2
1. Check the fuse.
2. If the fuse is OK, go to Step 3.
3. If the fuse is burned, check for a short circuit in the harness.
Repair as necessary before replacing the fuse.
Step 3
1. Turn the ignition switch ON.
2. Turn the blower switch to the maximum position.
3. Measure the voltage at the terminal-wires of the blower motor connector.