RX7 2RTR-1308cc 1.3L MFI (1991)
2. If correct, go to Step 7.
3. If not as specified, repair the wiring harness.
Step 1
1. Check for continuity between the terminal-wires of the logicon switch assembly and the power transistor.
2. If correct, go to Step 8.
3. If not as specified, repair the wiring harness.
Step 8
1. Check for continuity between the terminal-wires of the blower motor and the power transistor.
2. If not as specified, repair the wiring harness.
3. If correct, replace the power transistor.
Step 9 (Except Non-Turbo M/T)
1. Turn the ignition switch ON.
2. Turn the blower switch ON.
3. Measure the voltage at the terminal-wires of the Ign relay.