RX7 2RTR-1308cc 1.3L MFI (1991)
![background image](/mazda/rx7/2rtr-1308cc_1.3l_mfi/Page-873002.png)
1.
Remove wire clip from groove at both sides using a small screwdriver.
2.
Remove connector.
NOTE:
Connector may be hard to remove, apply steady force on connector body NOT harness wiring.
Disclaimer
1.
Remove wire clip from groove at both sides using a small screwdriver.
2.
Remove connector.
NOTE:
Connector may be hard to remove, apply steady force on connector body NOT harness wiring.
Disclaimer