RX7 2RTR-1308cc 1.3L MFI (1991)
1. Tighten the mounting bracket bolts in the order shown while pushing the pinion shaft in the direction indicated.
2. Connect the intermediate shaft to the pinion shaft.
3. Make sure that the clearance between the universal joint and the crossmember is 6-15 mm (0.24-0.59 in). If not within specification, disconnect
the intermediate shaft and repeat Steps 1 and 2.
4. Tighten the intermediate shaft bolt.
Tightening torque: 16-24 Nm (1.6-2.4 m-kg, 12-17 ft-lb)
Disassembly