RX7 2RTR-1308cc 1.3L MFI (1991)
Use a chisel to make a groove in the head of the steering lock mounting bolts. Remove the bolts with a screwdriver. Remove the steering lock
assembly.
INSPECTION
Check for the following and replace the column assembly if necessary.
Steering Shaft
1. Column bushing wear.
2. teering shaft length.
Length: 815.5 +/- 1.5 mm (32.11 +/- 0.06 in)
Steering Lock Assembly (Automatic transmission only)
Verify that the cable connector does not move when the key is in the LOCK position and that it moves freely with the key in other positions.
ASSEMBLY
Steering Lock Mounting Bolts and Bracket