RX7 2RTR-1308cc 80 (1984)
4.
Place the turn signal in the "OFF" position.
5.
Carefully pry the cancel cam from the combination switch using a screwdriver.
6.
Install the new cancel cam to the combination switch.
NOTE:
It is not necessary to apply additional grease to the cancel cam.
Align The Tabs Of The Cancel Cam
7.
Align the tabs of the cancel cam with the holes in the steering wheel and install the steering wheel.
NOTE:
The cancel cam will be broken if the tabs are not aligned with the holes in the steering wheel.
8.
Install the steering wheel and torque the retaining nut to specification.
RX-7, 626, GLC:
29-36 ft.lbs
B2000, B2200:
22-29 ft.lbs
WARRANTY INFORMATION
Customer Comment Code:
7E
Damage Code:
01
Part No. of Main Cause:
RX-7:
BA29 66 126
GLC:
BA29 66 126
GLC(W):
BA29 66 126
626:
BA29 66 126 (w/o cluster switch)
H001 66 126 (w/o cluster switch)
B2000/B2200: UA13 66 126
Operation No:
60253X-RX
Labor Hour:
0.3 Hr.