RX7 2RTR-1308cc 80 (1984)
Power Mirror Switch: Technical Service Bulletins
Rearview Mirror, Outside Electric - Installation
Category 15
Applicable Model/s RX-7
Subject
OUTSIDE ELECTRIC REARVIEW MIRROR INSTALLATION PROCEDURES
Bulletin No.
002/84
Issued
3/16/84
Revised
DESCRIPTION
Please use the following procedures when installing the outside electric rearview mirrors on RX-7's. This will eliminate any possibility of pinching the
wiring harness.
INSTALLATION PROCEDURES
1.
Insert the wiring harness first through the hole in the gasket and second through the hole in the base.
2.
Install the gasket and base to the door using the 2 screws provided.
3.
Insert the wiring harness through the stay.
4.
Install the stay to the base using the 2 screws provided.