RX7 2RTR- 1308cc 1.3L FI (1987)
Compressor HVAC: All Technical Service Bulletins
A/C Discharge Hose - Installation
Category
Applicable Model/s
Subject
Bulletin No. 019/87
16
1986-1987 RX-7
INSTALLATION OF A/C DISCHARGE HOSE
Issued
3/30/87
Revised
7/10/87
DESCRIPTION
*
When installing Air Conditioning kits on RX-7 vehicles, be sure that the discharge hose is routed away from the compressor clutch pulley and
TIE-WRAPPED TO THE LOWER OIL COOLER HOSE as shown below. Failure to do so may result in the discharge hose rubbing against
the compressor clutch pulley which could damage the hose.
*
The revised sections are indicated by an asterisk. Please replace the original bulletin with this revised bulletin.
