RX7 2RTR- 1308cc 1.3L FI (1987)
Headlight Lid Correct Position
3.
Adjust stopper so that headlight lid is flush with fender and hood.
RETRACTOR MOTOR POSITION ADJUSTMENT
Manual Operation Knob
1.
Remove front soft facia.
2.
Lower retractor hinge until it contacts the stopper.
3.
Remove motor assembly.
4.
Adjust motor arm position by turning manual operation know so that the motor arm is in its lowest position.
CAUTION:Do not remove motor arm from shaft. Doing so may cause incorrect automatic stop operation.
Headlight Motor Installation
5.
Check that retractor hinge is against stopper and headlight lid is flush with fender and hood.
6.
Connect motor link to hinge.
7.
Mount motor assembly to body and check for proper operation.
8.
Install front soft facia.