RX7 2RTR- 1308cc 1.3L FI (1987)
Fig. 40 Checking resistance of solenoid resistor.
4.
Check resistance of crank angle sensor.
5.
Check wire from crank angle sensor to control unit for continuity.
6.
On 1986-87 models, check resistance of solenoid resistor, Fig. 40.
7.
If resistance is not 5-7 ohms, replace resistor.
8.
On all models, check EGI main fuse, replacing as necessary.
9.
Check operating sound of main relay by turning ignition switch on and off.