RX7 2RTR- 1308cc 1.3L FI (1987)
Control Arm: Customer Interest
Suspension - Excessive Negative Rear Camber
Bulletin No.: 007/93
Issued: 9/16/93
Revised:
Category
R
Applicable Model/s
1986-92 RX-7
Subject
REAR CAMBER ADJUSTMENT
APPLICABLE MODELS/VINS
RX-7
1986 - Vehicles with a VIN of JM1FC33*G0400001 through JM1FC33*G04999999
1987 - Vehicles with a VIN of JM1FC33*H0500001 through JM1FC33*H05999999
1988 - Vehicles with a VIN of JM1FC33*J0600001 through JM1 FC33*JO6999999
1989 - Vehicles with a VIN of JM1FC33*K0700001 through JM1 FC33*K07999999
1990 - Vehicles with a VIN of JM1FC33*L0800001 through JM1FC33*L08999999
1991 - Vehicles with a VIN of JM1FC33*M0900001 through JM1 FC33*M09999999
1992 - Vehicles with a VIN of JM1FC33*N0100001 through JM1FC33*N01999999
DESCRIPTION
Vehicles exhibiting excessive negative camber of the rear wheels may be corrected with a modified rear lower arm. Modified rear lower arms have been
established as a service part to increase camber by 1 degree.
REPAIR PROCEDURES
Replace the rear lower arm according to the instructions in section R of the workshop manual.
PARTS INFORMATION
WARRANTY INFORMATION