RX7 2RTR- 1308cc 1.3L FI (1987)
Clutch: Technical Service Bulletins
A/T - Driven Plate Parts Catalog Revision
Category
Applicable Model/s
7
1986-88 RX-7
Subject
AUTOMATIC TRANSMISSION
Bulletin No.
061/89
DRIVEN PLATE
Issued
6/6/89
Revised
DESCRIPTION
Incorrect information was established in the parts catalog and microfiche concerning 1986-1988 RX-7 automatic transmission rear clutch driven plate.
Please refer to the table below for the correct parts information.
PARTS INFORMATION
PART NUMBER
DESCRIPTION
THICKNESS
Incorrect
0338 19 499
Driven Plate
.0784 in. (2.00 mm)
Correct
FT01 19 499
Driven Plate
.065 in. (1.65 mm)
Use the thinner driven plate (P/N FT01 19 499) for the 1986-88 RX-7 rear clutch.
NOTE:
Front clutch uses thicker driven plate. (P/N 0338 19 499).