RX7 2RTR- 1308cc 1.3L FI (1987)
Lock Nut
1. Shift the clutch hub sleeves to first gear and reverse gear to put the gears in the double-engaged condition.
2. Counter shaft lock nut
1. Connect the mainshaft holder (49 0259 440) to the mainshaft, and mount securely in a vise.
2. Remove the lock nut.
CAUTION: Do not re-use the lock nut.
3. Lock nut for 5th/reverse clutch hub.
1. Uncrimp the tabs of the lock nut.
2. Secure the bearing housing in a vise.
3. Remove the lock nut using lock nut wrench (49 1243 465A).
CAUTION:
a. Do no re-use the lock nut after it has been removed.
b. Use pads in the vise.