RX7 2RTR- 1308cc 13L Turbo FI (1989) Brake Pad Service and Repair
Brake Pad: Service and Repair
Front
Replace left and right brake pads at the same time. Do not replace one wheel side only.
1.
Raise and support front of vehicle.
2.
Remove tire and wheel assembly.
3.
On single piston caliper, remove lockpin bolt and lift caliper assembly with brake line connected, from disc assembly.
4.
On four piston caliper, remove pad pins and springs.
5.
On all models, remove brake pads from caliper assembly.
6.
Reverse procedure to install. When installing new brake pads, push caliper piston inward using piston compressor No. 490221600C or equivalent.
On single piston caliper, torque lock bolt to 23-30 ft. lbs.
