RX7 2RTR- 1308cc 1.3L Turbo FI (1989)
Oil Pump: Service and Repair
Removal
Legend
1. Cooling fan
2. Air pump drive belt
3. Alternator drive belt
4. P/S pump and drive belt
5. A/C compressor and drive belt
6. Crank angle sensor
7. A/C compressor P/S pump bracket
8. Oil pipe
9. Metering oil pump
10. Oil pan
11. Eccentric shaft pulley lock bolt
12. Eccentric shaft bypass valve and spring
13. Eccentric shaft pulley
14. Front cover
15. Distributor drive gear
16. Oil pump drive gear, driven gear, and chain
17. Oil pump
OIL PUMP
Removal
1. Disconnect the negative battery cable.
2. Drain the engine oil.
3. Remove in the order shown in the image, referring to Removal Note.
