RX7 2RTR- 1308cc 1.3L Turbo FI (1989)
ABS Light: Testing and Inspection
Fig. 45 Anti-lock Warning Light Terminal Identification.
1.
Remove clock bezel assembly, then slide warning and clock unit from instrument panel.
2.
Connect terminal R on 1989 models or terminal E on 1990-91 models wire to body ground, start engine and check that ABS warning light
illuminates, Fig. 45.
3.
If there is no illumination, check the meter fuse, bulb and wiring harness.
4.
If there is illumination, check wiring harness between warning light and control unit or hydraulic unit.
