RX7 2RTR- 1308cc 1.3L Turbo FI (1989)
10. Apply sealant to the spring cap threads.
NOTE: If the select-lock spindle is not pushed down, the ball will not correctly engage it.
11. Push the select-lock spindle down by pushing on the control rod.
12. Insert the ball and spring, and install the spring cap.
Tightening torque: 3.9 - 5.9 N-m (40 - 60 cm-kg, 35 - 52 in-lb)
13. Apply sealant to the contact surfaces of the change control case and blind cover.
14. Install the blind cover.
Tightening torque: 7.8 - 11 N-m (80 - 110 cm-kg, 69 - 95 in-lb)
Undercover
Install the undercover and a new gasket.
Tightening torque: 7.8 - 11 N-m (80 - 110 cm-kg, 69 - 95 in-lb)