RX7 2RTR- 1308cc 1.3L Turbo FI (1989)
CAUTION: Hold the mainshaft with one hand so that it does not fall.
Press the 1st/2nd clutch hub assembly and 1st gear sleeve from the mainshaft.
Countershaft center bearing inner race
CAUTION: Hold the countershaft with one hand so that it does not fall.
NOTE: Replace the countershaft center bearing and counter- shaft center bearing inner race as one assembly.
Remove the inner race of the countershaft center bearing from the countershaft with the SST.
Countershaft front bearing spacer
NOTE: Replace the countershaft front bearing and counter- shaft front bearing spacer as one assembly.
1. Position the SST between the countershaft front bearing spacer and countershaft.
CAUTION: Hold the countershaft with one hand so that it does not fall.
2. Press the countershaft out front the countershaft front bearing spacer.