Tribute 2WD L4-2.3L (2005)
Normal Operation
The 4WD control module communicates with the diagnostic tool through the high speed CAN communications network, circuits (W) and (B). If one of
the bus wires becomes shorted to ground or voltage, communications can continue at a reduced level. Check circuits (W) and (B) between the 4WD
control module 0318-01 and the DLC D-01. Total resistance values must not be more than 5 Ohms. If the resistance is more than 5 Ohms there is an
open in one of the high speed CAN circuits, damage to the DLC D-01, damage to the 4WD control module 0318-01, or a problem in an in-line
connector.
Possible Causes
-
high speed CAN circuits (W) and (B) shorted to ground or open
-
DLC D-01
-
0318-01
-
4WD control module
Pinpoint Test 5
PINPOINT TEST 5: NO INTERNATIONAL STANDARDS ORGANIZATION (ISO) 9141 NETWORK COMMUNICATION