Tribute 2WD L4-2.3L (2005)
9. Install the inboard seat cushion side shield.
10. Install the outboard seat cushion side shield.
1. Install the shield, if equipped with a power/heated seat, connect the electrical connector(s).
2. Install the screw.
3. Install the seat backrest lever handle.
11. Install the driver seat.
Front Seat Backrest - Passenger Seat Disassembly and Assembly
FRONT SEAT BACKREST - PASSENGER SEAT DISASSEMBLY AND ASSEMBLY
Disassembly Note
NOTE: If a side air bag deployment took place, a new seatback pad, trim cover, and side air bag module must be installed. A new seatback frame
should be installed if necessary.
CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle may
result in damaged components.
1. Remove the passenger seat.