Tribute 2WD L4-2.3L (2005)
Thermostat: Service and Repair
THERMOSTAT AND THERMOSTAT HOUSING - 2.3L
Removal and Installation
1. Drain the engine coolant.
2. Remove the accessory drive belt tensioner.
3. Remove the thermostat and thermostat housing assembly.
^
Loosen the clamps, disconnect the hoses and position aside.
^
Remove the bolts, thermostat housing and the thermostat housing gasket.
Note:
^
Clean and inspect the thermostat gasket and all sealing surfaces.
4. To install, reverse the removal procedure.