Tribute 2WD L4-2.3L (2005)
Removal
Caution:
^
During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket
surfaces, that enters the oil passages, coolant passages or the oil pan can cause engine failure.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the ignition coil-on-plugs.
3. Disconnect the crankcase vent hose.
4. Remove the coolant vent tube bracket nuts and position aside the coolant vent tube.
5. Disconnect the CMP sensor electrical connector.
6. Disconnect the fuel rail pressure and temperature sensor electrical connector.
7. Lift up the connector boot and disconnect the CHT sensor electrical connector.
8. Disconnect the vacuum tube retainer and position aside the vacuum tube.