Tribute 2WD L4-2.3L (2005)
Oil Filter Adapter: Service and Repair
OIL FILTER ADAPTER AND OIL PRESSURE SENDER
OIL FILTER ADAPTER
Removal and Installation
1. Raise and support the vehicle.
2. Remove the RH splash shield.
3. Drain the cooling system.
4. Disconnect the oil cooler coolant hoses.
5. Disconnect the oil pressure sender electrical connector.
6. Remove the oil filter adapter.
^
Remove the oil filter adapter bolts.
^
Remove and discard the oil filter adapter gasket.
Note:
^
Install a new oil filter adapter gasket.
7. To install, reverse the removal procedure.