Tribute 2WD L4-2.3L (2005)
Exhaust Manifold: Service and Repair
Right
EXHAUST MANIFOLD - RH
Removal
1. Remove the generator.
2. Remove the exhaust flexible pipe.
3. Disconnect and remove the RH heated oxygen sensor (H02S).
4. Remove the exhaust gas recirculation (EGR) tube.
5. Remove the RH manifold.
^
Discard the gasket.
Installation
1. Position a new gasket and install the exhaust manifold nuts in the sequence shown.
2. Install the EGR tube.
3. Install RH the H02S.
4. Install the exhaust flexible pipe.
5. Install the generator.