Tribute 2WD L4-2.3L (2005)
3. Remove the cross brace.
4. Remove the insulator cross bolt.
Note: The engine support brace will be -removed with the insulator attached.
5. Remove the engine support brace bolts and nut.
6. Remove the 2 bolts and the insulator.
7. To install, reverse the removal procedure.
Transaxle Support Insulator - LH
TRANSAXLE SUPPORT INSULATOR - LH
Removal
1. Disconnect the breather tube and mass air flow (MAF) sensor.
2. Remove the intake tube and air cleaner cover.