Tribute 2WD L4-2.3L (2005)
Front Door Window Regulator: Service and Repair
Removal and Installation
1. Remove the front door trim panel.
2. Remove the screw and the front door trim panel bracket.
3. Position the water shield aside.
4. Connect the window control switch electrical connector.
5. Connect the battery.
6. Lower the front door window glass to gain access to the screws.
7. Disconnect the battery.
8. Disconnect the window control switch electrical connector.
9. Remove the front door window glass screws.
10. Support the front door window glass in the full up position.
11. Disconnect the front door power window regulator motor electrical connector.