Tribute 2WD L4-2.5L (2009)
Front Door Window Glass: Service and Repair
Front Door Window Glass Removal/Installation
FRONT DOOR WINDOW GLASS REMOVAL/INSTALLATION
1. Remove the front door trim panel. See See: Front Door Panel/Service and Repair.
2. Remove the screw and the door trim panel bracket.
3. Remove the 3 pushpins and pad assembly.
4. Position the watershield aside.
5. Remove the interior door glass weatherstrip.
6. Connect the window control switch electrical connector.
7. Using the window control switch, lower the front door window glass to gain access to the front door window glass screws.
8. Disconnect the window control switch electrical connector.
9. Remove the 2 front door window glass screws.
-
To install, tighten to 5 Nm {0.5 kgf-m, 44 in-lbf}.