Tribute 2WD L4-2.5L (2009)
1. With vehicle in NEUTRAL, position it on a hoist. See See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.
2. Remove the cooling fan motor and shroud. See - See: Radiator Cooling Fan/Radiator Cooling Fan Motor/Service and Repair.
3. Disconnect the upper radiator hose from the radiator.
4. Disconnect the lower degas bottle-to-radiator hose from the radiator.
5. Disconnect the lower radiator hose from the radiator.
6. Remove the 2 A/C condenser-to-radiator bolts and position aside the A/C condenser from the radiator.
-
To install, tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
7. Remove the radiator.
8. To install, reverse the removal procedure.
9. Fill and bleed the cooling system. See - See: Radiator Cooling Fan/Radiator Cooling Fan Motor/Service and Repair.