Tribute 2WD L4-2.5L (2009)
Harmonic Balancer - Crankshaft Pulley: Specifications
Install a new crankshaft pulley bolt. Use the Crankshaft Damper Holding Tool and a suitable 1/2-in drive hand tool to hold the crankshaft pulley, tighten
the crankshaft pulley bolt in 2 stages:
Stage 1:.................................................................................................................................................................Tighten to 100 Nm {10.2 kgf-m, 74 ft-lbf}.
Stage 2:................................................................................................................................................................Tighten an additional 90 degrees (1/4 turn).