Tribute 2WD L4-2.5L (2009)
Exhaust Manifold: Specifications
Install the 7 new catalytic converter and exhaust manifold studs.
Tighten to................................................................................................................................................................................17 Nm {1.7 kgf-m, 177 in-lbf}.
Position the catalytic converter and exhaust manifold and tighten the 7 exhaust manifold and catalytic converter nuts in the sequence shown:
Step 1:.......................................................................................................................................................................Tighten to 47 Nm {4.8 kgf-m, 35 ft-lbf}.
Step 2:.......................................................................................................................................................................Tighten to 47 Nm {4.8 kgf-m, 35 ft-lbf}.