Tribute 2WD L4-2.5L (2009)
8. If the pressure drops, check the heater hose connections to the core tubes for leaks. If the heater hoses do not leak, remove the heater core from the
vehicle. See See: Service and Repair.
9. Carry out the bench test.
Heater Core - Bench Test
1. Remove the heater core from the vehicle. See See: Service and Repair.
2. Drain all of the coolant from the heater core.
3. Connect the 101 mm (4 in) test heater hoses with plug and adapter to the core tubes. Then connect the Pressure Test Kit to the adapter.
4. Apply 138 kPa (20 psi) of air pressure to the heater core. Submerge the heater core in water.
5. If a leak is observed, install a new heater core.