Tribute 2WD L4-2.5L (2009)
hole.
2. Fill the degas bottle to the MAX fill line.
3. Close the degas bottle cap and the bleed valve.
4. Start the engine and let it idle for 30 minutes or until the engine reaches normal operating temperature.
CAUTION:If the engine overheats or the fluid level drops below the minimum fill line, shut off the engine and add fluid to the degas bottle maximum
fill line once the engine cools. Failure to follow these instructions may result in damage to the engine.
5. Allow the engine to cool and repeat Step 2 if necessary.
6. Start the engine and turn the heater to the MAX position.
7. Run the engine at 2,500 rpm for 10 minutes.
CAUTION:If the engine overheats or the fluid level drops below the minimum fill line, shut off the engine and add fluid to the degas bottle maximum
fill line once the engine cools.
8. Repeat Step 7 if necessary.
9. Check the engine coolant level in the degas bottle and fill as necessary.
WARNING:Always allow the engine to cool before opening the cooling system. Do not unscrew the coolant pressure relief cap when the engine is
operating or the cooling system is hot. The cooling system is under pressure; steam and hot liquid can come out forcefully when the cap is loosened
slightly. Failure to follow these instructions may result in serious personal injury.
