Tribute 2WD L4-2.5L (2009)
Fluid - A/T: Removal and Replacement
TRANSMISSION FLUID DRAIN AND REFILL
NOTE:In order to completely clean the torque converter, this procedure needs to be carried out 3 times.
1. With the vehicle in NEUTRAL position it on a hoist. See See: Vehicle Lifting/Service and Repair/Lifting.
2. Remove the transmission fluid drain plug and allow the transmission fluid to drain.
NOTE:If an internal problem is suspected, drain the fluid through a paper filter. A small amount of metal or friction particles may be found from normal
wear. If an excessive amount of metal or friction material is present the transaxle will need to be overhauled.
3. Install the transmission fluid drain plug.
-
Tighten to 9 Nm {0.9 kgf-m, 80 lb-in}.