Tribute 2WD L4-2.5L (2009)
9. Install the circuit filter.
10. Install the separator plate and the 2 bolts.
-
Tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
11. If not previously done, see See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and Repair/Overhaul/Main
Control Valve Body Assembly Disassembly/Assembly for disassembly and assembly of the valve body.
12. Position the solenoid body assembly on the valve body and install the 2 bolts.