Tribute 2WD L4-2.5L (2009)
1. Remove the transmission fluid drain plug and allow the transmission fluid to drain.
2. Install the transmission fluid drain plug.
-
Tighten to 12 Nm {1.2 kgf-m, 106 in-lbf}.
3.0L engine
1. Drain the cooling system. See - See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair/Removal and Replacement.
2. Disconnect the upper radiator hose from the coolant pump housing and position it aside.
3. Disconnect the lower radiator hose from the thermostat housing and position it aside.
All vehicles