mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Transmission Position Switch/Sensor, A/T|Service and Repair|Page 3251 > < Transmission Position Switch/Sensor, A/T|Service and Repair|Page 3249

Tribute 2WD L4-2.5L (2009)

Page 10
background image

9. Install the main control cover 8 bolts and 5 stud bolts.

-

Tighten to 12 Nm {1.2 kgf-m, 106 in-lbf}.

CAUTION:Inspect the main control cover grommet to make sure that the seal is on the inside of the main control cover, or transaxle fluid leak will
occur.
NOTE:Install the stud bolts in the locations noted during disassembly.

Transmission Position Switch/Sensor, A/T|Service and Repair|Page 3251 > < Transmission Position Switch/Sensor, A/T|Service and Repair|Page 3249