Tribute 2WD L4-2.5L (2009)
12. Connect the transaxle electrical wiring harness retainers to the transmission fluid pan stud bolts.
13. Install the manual control lever and the nut.
-
Tighten to 24 Nm {2.4 kgf-m, 17.7 ft-lbf}.
CAUTION:Make sure that when installing the manual control lever it is fully seated onto the manual control lever shaft or damage to the manual control
lever shaft will occur and the lever will come loose.
CAUTION:Make sure to hold the manual control lever while tightening the manual control lever nut or damage to the manual control lever and park
components will occur.