Tribute 2WD L4-2.5L (2009)
-
To install, tighten to 20 Nm {2.0 kgf-m, 177 in-lbf}.
8. Working from the top of the vehicle, press the locking tab to release the generator lower air duct from the generator and remove the lower air duct.
9. Position the generator B+ protective cover aside and remove the generator B+ terminal nut.
-
To install, tighten to 12 Nm {1.2 kgf-m, 106 in-lbf}.
10. Position the generator B+ cable aside.
11. Disconnect the generator electrical connector.
12. Remove the generator stud and remove the generator.
-
To install, tighten to 25 Nm {2.5 kgf-m, 18 ft-lbf}.
13. Remove the 3 screws and the generator upper air duct.
-
To install, tighten to 4 Nm {0.4 kgf-m, 35 in-lbf}.
14. To install, reverse the removal procedure.